We are a serious forum, so we place great value on articles that are written with time and care/love. According to these well kept handlings, we raise from any other car forums and represent, as our cars, a special class.

Key Points of Operation for Starting up Truck Crane

#1 by sanyglobal , Tue Dec 13, 2016 12:18 am

Each part of the Truck Crane operation is crucial for the operator and machine safety. Following are the key points of operation for starting up truck crane for your reference. Construction Crane

1.The oil pressure indicated by oil pressure gauge shall be higher than 0.15MPa;2. The signal lamps for air pressure and parking brake shall go out, and the air pressure shown by air pressure gauge shall be higher than 0.65MPa;Crawler Cranes 3. The water temperature in engine shall be higher than 60℃;4. The parking brake shall be released;5. Shift the transmission handle to Gear I, gradually release the clutch pedal, and then lightly tread the throttle pedal to start the truck Cranes.

Other points you should pay attention:1. During the gear shifting, pull the gear lever to the higher or lower gears one by one;2. The air pressure indicated by the air pressure gauge shall be equal to or higher than 0.65MPa, and the signal lamps for air pressure and parking brake shall go out;Mobile Tower Crane 3. The oil pressure in engine shall be equal to or higher than 0.2MPa;4. The water temperature in engine shall be kept between 70℃ and 90℃;5. The engine and transmission shall be free of abnormal noise and phenomenon;6. The brakes shall work normally;7. It is forbidden to glide the truck Hydraulic Crane by means of shutting down engine and pulling gear lever to “Neutral” position;8. It is prohibited to tread the clutch pedal when the clutch is not used.

sanyglobal  
sanyglobal
Posts: 57
Date registered 05.10.2016


   

Adidas Superstar Dames NL
a reputable company.

Xobor Create your own Forum with Xobor